pet blow moulding machine air compressor

pet blow moulding machine air compressor 1.FAD:17.5m3/min 2. pressure:10bars 3.Motor:110KW 4.Cooling:air

pet blow moulding machine air compressor

Fully automatic load and unload. Compressor will start automatically and shut down under the following conditions:

-          When the target pressure in the air tank has been reached

-          When the voltage drops below a thrashold

-          In an over-pressure condition

-          When the temperature reaches a protection setpoint

High-quality European technology and components (GHH-Rand and SKF)

LOFTOLL air filter with long-life capability.(4000 hours+), easy for maintenance and replacement.

LOFTOLL  oil filter, filtration density 10 micron (99.9% efficiency) and long-life capability (4000 hours+).

LOFTOLL  air-oil separator, particle count below 3 ppm

Control system: All parts are by Schneider in France

Specification of screw air compressor:

Model	Capacity/pressure M3/min/Mpa	Compre ssing stage	Tem of delivery	Power (V/ph/Hz)	Motor (kw)	Start method	Dia. of hole	Drive
KB-40A	5.2/0.7	One Stage	Air cooling: <surroun dings +15°C	380/3/50	30		G1.25”	Belt drive
	5.01/0.8						G1.25”
	4.52/1.0						G1.25”
	3.83/1.2						G1.25”
KB-50A	6.82/0.7				37		G1.5”
	6.24/0.8						G1.5”
	5.74/1.0						G1.5”
	4.93/1.2						G1.5”
KB-60A	7.42/0.7				45		G1.5”
	7.11/0.8						G1.5”
	6.22/1.0						G1.5”
	5.65/1.2						G1.5”
KB-75A	10.83/0.7				55		G2”
	9.2/0.8						G2”
	8.61/1.0						G2”
	7.71/1.2						G2”
KB-100A	14.11/0.7				75		G2”
	13.02/0.8						G2”
	12.04/1.0						G2”
	10.06/1.2						G2”